Catalinbread squeezes the Yamaha SPX90’s shoegaze reverb into the Early Verb FX90
Subscribe
X

Subscribe to Mixdown Magazine

16.11.2026

Catalinbread squeezes the Yamaha SPX90’s shoegaze reverb into the Early Verb FX90

The five-knob pedal recreates the rack unit’s Early Reflections patch, swelling echoes and all, with a feedback path for an even denser wash.

Catalinbread has taken one of the most-loved patches from Yamaha’s SPX90 rack unit and put it in a pedal, and the Early Verb FX90 is built with the shoegaze and dream-pop crowd in mind.

Read all the latest product & music industry news here.

The SPX90 was a fixture in late-’80s studios, and its Early Reflections patch, a burst of percussive echoes that swells into a light reverb with the attack softened right off, became part of the sound of that era’s shoegaze records, the kind of hazy, almost backwards wash tied to My Bloody Valentine. Getting it out of the original rack meant a fiddly edit process and a tangle of cables, so Catalinbread has boiled it down to five knobs and a footswitch, and added a feedback path that gathers the reflections into a denser cloud.

The DLY control sets up to around 400 milliseconds of pre-delay, holding the swell back so the dry note lands first, while Time changes the spacing between the initial echoes, from bunched together at the bottom of its range to widely scattered at the top. Room works as a dual control for echo volume and feedback, so it goes from a tight slapback at its lowest setting through to a huge, cathedral-sized wash as it comes up. Mix blends the wet and dry signals, and with it set fully wet the pick attack disappears behind the swell for a volume-pedal-style fade-in on every note. Vol sets the output level and doubles as a preamp gain stage, adding a bit of grit as it’s turned up.

It’s the second SPX-era pedal from the Portland builder, following the Soft Focus, which borrowed its sound from a patch on Yamaha’s FX500. The Early Verb FX90 is true bypass, runs on 9V power and is made in the USA, and at 60 x 110 x 50mm it’ll fit on most boards without much reshuffling.

For more information, head here